Description

Happymodel Mobula6 Freestyle BNF is a 65nm low light BNF using the HDZero AIO5 designed for freestyle whooping. It is under 20grams.

Specifications

• Weight: 19.6g

• Recommended Battery: 1S 300mAh with A30 or BT2.0 plug

• Propeller Size: 31mm

• AIO

  • MCU: STM32F411 (100MHz, 512K Flash)

  • Gyro: BMI270

  • On board voltage and amperage meters

  • Built-in 5A(each) BLHeli_S 4-in-1 ESC

  • Bluejay ESC firmware pre-installed

  • Built-in 5.8G HDZero VTX

  • Built-in SPI ExpressLRS 2.4GHz receiver compatible with expresslrs v3.0

  • Built-in 5V 1A BEC

  • Board size:28.5x28.5mm with a 25.5x25.5 mounting hole size

  • Betaflight firmware: CRAZYBEEF4SX1280 4.4.2 out of factory

• HDZero Lux Camera

  • Sensor size: 1/2 inch

  • Resolution: 720p60 4:3 and 16:9

  • FOV: D:155° H:126° V:94°(4:3)

  • FOV: D:145° H:126° V:70°(16:9)

  • WDR

• Motors     

  • Kv:28000

  • Stator diameter: 7mm

  • Stator length:2mm

  • Shaft diameter: Φ1mm

  • Weight:1.5g

Included

• 1x Happymodel Mobula6 Freestyle BNF

• 1x Spare canopy

• 1x Spare propeller(set)

• 1x Screw driver

• 1x propeller disassemble tool